Cannabis Consulting in California
California Cannabis California Cannabis Business License Compliance Manufacturer 2 Extraction Volatile Solvents Medicinal M Type 7

California Cannabis Business License Compliance Manufacturer 2 Extraction Volatile Solvents Medicinal M Type 7, 2018 Local News, Information & Updates


California Cannabis Manufacturers


Frequently Asked Questions

Are butters classified as an edible product or a concentrate?

The Manufactured Cannabis Safety Branch has classified infused butters and oils as concentrates.

Can a Cannabis business package pre-rolls or flowers if a Cannabis business is a licensed manufacturer?

Yes, manufacturers may package flower or pre-rolls. Flower and pre-rolls that only contain flower must meet the packaging and labeling standards outlined in the California Business and Professions Code. Pre-rolls that also contain concentrates (“infused” pre-rolls) must meet the packaging and labeling requirements for manufactured products that are outlined in the MCSB regulations for cannabis manufacturing.

What is the limit to the number of Cannabis licenses the California Department of Public Health (CDPH) can issue?

No limit is in place for the number of licenses that CDPH will issue.

What's the difference between cannabis exit packaging and cannabis secondary packaging?

No. Exit packaging is the package that a consumer’s purchased product is placed into by a retailer so it is ready to leave the store after the sale is complete. The Bureau of Cannabis Control has outlined requirements in their regulations for exit packaging used by retailers. Manufacturers are responsible for packaging and labeling their products in its final form, prior to release to a distributor as a finished product. This includes ensuring that the packaging of the finished product is child resistant. Secondary package is a child-resistant outer package, such as a bag, that a manufacturer can place their product in to fulfill the child-resistant packaging requirement.

After a cannabis business receives a cannabis temporary license, how does it apply for the cannabis annual license?

Annual licenses are being accepted through our online system, the Manufactured Cannabis Licensing System (MCLS). MCLS is available to access now on the Licensing page of the CDPH website.

Can a Cannabis Manufacturer manufacture both adult-use and medicinal cannabis products on the same premises?

Yes, a business can hold licenses for both medicinal and adult-use cannabis manufacturing at the same premises. During the transition period, which is in effect from January 1 to July 1, 2018, products will be able to cross between the medicinal and adult-use markets. Beginning on July 1, 2018, the supply chains for medicinal and adult-use cannabis products must be kept separate.

During the transition period, what are cannabis product requirements for THC limits?

All cannabis products manufactured on or after January 1, 2018 must meet regulatory THC limits. Edible products cannot contain more than 10 milligrams per serving or 100 milligrams per package. Non-edible cannabis products cannot contain more than 1,000 milligrams per package (adult-use) or 2,000 milligrams per package (medicinal).

Where can the cannabis universal symbol be downloaded?

Links to download the universal symbol are on the Regulations page of the state website. It is available in hi-res JPG, PNG and PDF files.

For cannabis pre-rolls, what are the labeling and packaging requirements?

Pre-rolls that only contain flower must follow all packaging and labeling standards outlined in the California Business and Professions Code. Pre-rolls that contain both flower and concentrates (infused pre-rolls) must meet all packaging and labeling required of manufactured products, as outlined in the MCSB regulations for cannabis manufacturers.

Where can a Cannabis Manufacturer find more information on cannabis' health issues?

The California Department of Public Health (CDPH) is leading a campaign called Let's Talk Cannabis, which serves as a resource for Californians seeking fact-based information about cannabis and its effects on their health. More information about the health impacts of cannabis can be found on the CDPH Let's Talk Cannabis website.

Where can a cannabis business get forms that are required for the Live Scan background checks?

The Manufactured Cannabis Safety Branch is currently finalizing the information needed for this process and will post the required “Request for Live Scan” form on the website soon.

If any criminal history exists, would that produce an automatic denial of the cannabis annual license business application?

There are no mandatory denials for criminal history. The Manufactured Cannabis Safety Branch will be evaluating each applicant’s history on a case-by-case basis. Convictions that are considered “substantially related” and possibly could lead to denial are serious and violent felonies, drug offenses involving minors, and violations of food safety laws. If you have this type of conviction, you can submit evidence of rehabilitation and a description of circumstances. This information will be considered during the application review process.

Regarding Manufactured Cannabis Products, what is an Extraction activity?

Extraction is removal of THC/CBD from cannabis plants via a mechanical method or chemical solvent method.

If a local jurisdiction has not yet ruled on a cannabis activity, can a cannabis business still apply for a cannabis temporary license or annual license?

By state law, temporary licenses require local authorization to operate a cannabis business. If your local jurisdiction is not providing authorization, you will not be able to apply for a temporary license. If the city or county does not have any ordinances in place specific to cannabis, you must comply with all other rules that would apply to a similar business or facility in order to hold an annual license for cannabis manufacturing.

Are only cannabis edible products required to have the cannabis universal symbol?

All manufactured cannabis products – both edible and non-edible – must have the universal symbol on the label’s primary panel.

When are cannabis businesses required to pay for the cannabis annual license application and fess for licensing?

The application fee is paid when the annual license application is submitted. The licensing fee is paid when the annual license application is approved.

For a cannabis A-license, would a cannabis manufacturer be allowed to purchase from and sell to cannabis M-license businesses?

During the transition period, which lasts from January 1 until July 1, 2018, you can do business with adult-use licensees or medicinal use licensees, regardless of whether you have an A- or M- license. Beginning July 1, 2018, A-licensees can only do business with A-licensees, and M-licensees can only do business with M-licensees.

What are the requirements for cannabis products manufactured during the transition period?

Products manufactured during the transition period, from January 1 until prior to July 1, 2018, must meet THC limits, product standards and basic packaging and labeling requirements. Cannabis products must be in child-resistant packaging, and the label must contain the government warning statement and amount of THC/CBD per serving and per package.

For the newly regulated cannabis market in California, what is the licensing transition period?

The three licensing authorities have outlined a six-month transition period to address existing product and support a smooth transition into a newly regulated market. The transition period allows for existing product to move though the commercial cannabis market if it meets basic requirements.

Can a business extend their MCSB temporary license?

Yes, a business can extend their MCSB temporary license by 90 days if submitted with a complete annual license application, subject to the discretion of MCSB.

Does a Manufacturing business need to obtain a license from CDPH?

Yes, any person or business must obtain a manufacturing license in order to engage in commercial cannabis manufacturing. Each license must have one category and one type.

For MAUCRSA, if a cannabis business does not yet know what the gross annual revenue shall be for the initial year of operation, what should be listed?

For the first year of operations, the gross annual revenue is an estimate. In subsequent years, the gross annual revenue is based on the prior year’s taxes. A good-faith attempt must be made to create an accurate first year estimate. When you submit your annual license application, you will attest under penalty of law that the information in your application is true and accurate.

How does a Cannabis business apply for a cannabis temporary license?

A cannabis business can access the temporary license application on the CDPH website. The completed application and a copy of the business's local city or county authorization can be emailed to mcls@cdph.ca.gov or mailed to the following address:
CDPH – Manufactured Cannabis Safety Branch
Attn: Licensing Unit
PO Box 997377, MS 7606
Sacramento, CA 95899-7377

What does MCSB stand for?

Manufactured Cannabis Safety Branch

What does the California MCSB do?

The Manufactured Cannabis Safety Branch (MCSB), housed within the California Department of Public Health, licenses and regulates manufacturers of commercial cannabis products.

Does a temporary license or annual license require a local authorization?

Yes

What is a cannabis local authorization and who issues it?

A local authorization is a document from your local city or county that permits you to operate a cannabis business. This documentation will look different in every jurisdiction but may be a cannabis business permit, temporary cannabis license or letter of authorization to operate a cannabis business. Contact your city or county government office for more information about the procedures in your jurisdiction.

What is a temporary license?

A temporary license is valid for 120 days and is a MCSB conditional license allowing for a cannabis business to conduct commercial cannabis activity.

Do cannabis products require Proposition 65 language on the labeling?

Cannabis businesses must follow all applicable state laws, just like any other business operating in the state. Therefore if the Office of Environmental Health Hazard Assessment (OEHHA) requires your product to contain the Proposition 65 warning statement, then you must follow state law and include that information. OEHHA can provide more information about whether or not it is required for your product.

Does a cannabis business need to also apply for a temporary license if it applies for an annual license?

Beginning January 1, 2018, you must have a license to operate a cannabis business within the state of California. You can apply for an annual license whether or not you have a temporary license.

What does cannabis local authorization mean?

Both Proposition 64 and the Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) established a dual licensing structure in which both the state and local governments play a role in setting guidelines and public health standards for cannabis businesses. For temporary licenses, you must have local authorization to operate a cannabis business. This may be a cannabis permit, letter of acknowledgement, or another form of local authorization. You are required to submit a copy of this local authorization with your temporary license application. For annual licenses, you must be in compliance with all local ordinances. If your local jurisdiction has passed an ordinance allowing for cannabis manufacturing, you must comply with any rules established by these ordinances. If the city or county does not have any ordinances in place specific to cannabis, you must comply with all other rules that would apply to a similar business or facility. If the local jurisdiction has banned commercial cannabis manufacturing, you will not be able to obtain a state cannabis license.

Are cannabis oils classified as an edible product or a concentrate?

The Manufactured Cannabis Safety Branch has classified infused butters and oils as concentrates.

What are the cannabis packaging requirements for child-resistant packaging?

Our regulations require that packaging be child-resistant, as defined in section 1700 of the federal Poison Prevention Packaging Act of 1970 (PPPA). The Consumer Product Safety Commission, which administers the PPPA, has an online guide to child-resistant packaging. The PPPA outlines testing procedures for determining whether your product meets the standard of “child resistant.” Testing procedures can be found in the Code of Federal Regulations, Part 1700, Poison Prevention Packaging. If your product packaging meets the guidelines in the PPPA, it can be used for child-resistant packaging.

Regarding Manufactured Cannabis Products, what is a Concentrate?

Concentrates are cannabis products that contain concentrated THC/CBD. Concentrates include resin, wax and oil.

Regarding Manufactured Cannabis Products, what is an Infusion activity?

Infusion means putting THC/CBD concentrates directly into a product.

What types of cannabis licenses exist for the state of California?

MCSB will offer four license types for cannabis manufacturers:
Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
Type N – for infusions
Type P – for packaging and labeling only
Each license type is inclusive of the types in the list below it. For example, a Type 7 licensee would be able to perform Type 6, N or P tasks. A Type 6 license could perform Type N or P tasks. A Type N licensee would be able to perform Type P tasks.
In addition to these four licenses, MCSB is developing a fifth license type, Type S, for shared-use manufacturing facilities. This license type will be for businesses and facility owners that alternate use of a manufacturing premises. More information on this license type will be available soon.
More information about licenses for retailers, distributors, third-party testing laboratories and microbusinesses can be found on the Bureau of Cannabis Control's website. More information about licenses for cultivators can be found on the CalCannabis Cultivation Licensing website.

For how long does it take to process a cannabis temporary license application?

MCSB is committed to processing applications for temporary licenses as quickly as possible to minimize disruption to the market. Once an application is received, it will be reviewed for completeness and the city or county office will be contacted to verify the local authorization. The local office will be given up to 10 days to respond. If the local office confirms that the business is authorized to conduct commercial cannabis activities, MCSB will issue the license. No licenses will have an effective date prior to January 1, 2018. If commercial cannabis activity is banned in the city or county where your premises is located, you will not be able to obtain a state cannabis license.

Is there a place to view a list of recognized cannabis manufacturers?

A Licensee Lookup Tool is available on the Licensing page of the CDPH website.

To manufacture cannabis products, does the business have to be licensed?

Yes, the business must be licensed with MCSB (Manufactured Cannabis Safety Branch) in order to legally manufacture cannabis goods.

Regarding commercial cannabis manufacturing, can the public search and view a list of local jurisdictions?

The Manufactured Cannabis Safety Branch does not have a list of local jurisdictions that permit commercial cannabis manufacturing.

Does a Cannabis business need a manufacturing license if it produces Cannabidiol (CBD) products?

If the CBD in your products comes from a cannabis plant, you will need a license from our office to conduct commercial cannabis manufacturing. However, CBD from industrial hemp is not regulated under the state’s cannabis regulatory framework. The California Department of Food & Agriculture’s Industrial Hemp Advisory Board has some information on the current state laws surrounding industrial hemp and a list of FAQs on their website.

How much is the CDPH fees for a cannabis temporary license?

There is no fee to apply for a temporary license.

How much information regarding my Cannabis Manufacturing business is publicly available?

The Manufactured Cannabis Safety Branch (MCSB) website includes a public Licensee Lookup Tool which contains the business name, license type, license number, city and county, and license expiration date. Additional information will be available to members of the public through a Public Records Act request.

For a commercial cannabis manufacturing business, what is the criteria to determine if a cannabis product is considered edible or non-edible?

Edible cannabis products are products that are similar to traditional food products, such as cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints. Edible products have a THC limit of 10 milligrams per serving and 100 milligrams per package for both the medicinal and adult-use markets. Cannabis concentrates are not classified as edible products. Concentrates include products like tinctures, capsules, extracts, butter, cooking oils and vape cartridges. Concentrates have a THC limit of 1,000 milligrams per package for the adult-use market and 2,000 milligrams per package for the medicinal market. If you have a question about how your product is classified, email MCSB@cdph.ca.gov.

Is there any application fee or licensing fee for MCSB's temporary licenses?

No, there is no application fee or licensing fee for MCSB's temporary licenses.

What is an annual license?

An annual license is valid for 1 year allowing for a cannabis business to conduct commercial cannabis activity.

Can a Cannabis Manufacturer manufacture cannabis products in a commercial kitchen?

At this time, the use of commercial kitchens, in which multiple businesses share use of a single manufacturing space, is not permitted. The Manufactured Cannabis Safety Branch is working diligently to develop a regulatory framework which would allow for shared-use manufacturing facilities. Until this new regulatory language is released and approved, we are not able to issue licenses or accept applications for shared spaces.

Does a Cannabis business need two separate licenses to do two (Medicinal and recreational Adult-use) types of manufacturing?

You will only need two types of manufacturing licenses for the same premises if you plan to create both adult-use and medicinal products. If you are conducting manufacturing for both the medicinal and adult-use markets, you will need both M- and A-licenses to operate in both of those markets. However you do not need two licenses to conduct different types of manufacturing operations within one of those markets at the same premises, as long as all activities are disclosed on the application. A Type 7 licensee can also conduct Type 6, N & P activities on the same premises. A Type 6 licensee can conduct Type N & P activities on the same premises. A Type N licensee can conduct Type P activities on the same premises.

To receive a cannabis temporary license, is the business required to have the adult use licenses (A-license) AND the medicinal (M-license)?

During the transition period, which lasts from January 1 until July 1, 2018, you can do business with adult-use licensees or medicinal use licensees, regardless of whether you have an A- or M- license. Beginning July 1, 2018, A-licensees can only do business with A-licensees, and M-licensees can only do business with M-licensees.

What are the Cannabis state licensing authorities?

There are three state licensing authorities that each regulate a different aspect of the commercial cannabis market:
• Bureau of Cannabis Control, CA Department of Consumer Affairs – responsible for licensing cannabis retailers, distributors, third-party testing laboratories and microbusinesses.
• Manufactured Cannabis Safety Branch, CA Department of Public Health – responsible for licensing manufacturers of cannabis products
• CalCannabis Cultivation Licensing, CA Department of Food & Agriculture – responsible for licensing cannabis cultivators and operating the state's Track-and-Trace system

If the cannabis labeling does not fit on the package, how should the information be added?

The primary panel labeling information and the government warning statement must be on the package itself. If your product packaging is small, and you cannot fit all of the informational labeling on the package, you can use a supplemental label for those additional requirements. Examples of supplemental labels include a paper inserted into the packaging, a hang tag or a peel-back label.

During the regulatory transition period, what are the requirements for the packaging and labeling?

During the transition period, which lasts from January 1 until July 1, 2018, cannabis products may enter the commercial cannabis market if they have child-resistant packaging and the label contains the government warning statement and the amount of THC per serving. If the primary packaging is not child-resistant, the product may be placed in secondary packaging that is child-resistant to fulfill this requirement.

For how long can a cannabis business operate under a cannabis temporary license?

A temporary license is valid for 120 days from the date of the license. MCSB may approve 90-day extension periods if the holder of the temporary license submits a complete annual license application prior to the expiration date of the temporary license.

For A-licenses and M-licenses applications, does a cannabis business have to pay a fee for each if it applies for both types of licenses?

A (adult-use) and M (medicinal use) are two different categories of license. If you apply for both A- and M- annual licenses, you will pay two separate license application fees, and annual license fees – one for each license. The license fees are based on the gross annual revenue of the product produced under each license. For example, the license fee paid for the M-License is based on the gross annual revenue of the medicinal-use product manufactured at the licensed premises; the license fee paid for the A-License is based on the gross annual revenue of the adult-use product manufactured at the licensed premises.

If the cannabis business has multiple locations, will the cannabis temporary license cover each location of the cannabis business?

Temporary licenses are only valid for one premises. If your business has multiple premises where cannabis manufacturing occurs, you will need to apply for a temporary license for each premises. Beginning January 1, 2018, only licensed businesses will be able to conduct commercial cannabis activity and may only do business with other licensees. If a business is cited for operating without a license, the business might not be able to obtain a license in the future.

Can a cannabis business operate prior to being issued and approved for a cannabis temporary license?

Beginning January 1, 2018, you must have a license to operate a cannabis business within the state of California.

How does a cannabis business acquire a cannabis local authorization and where can it be obtained?

Local authorization comes from the city or county that has jurisdiction where you have your manufacturing facility. If you are located within an incorporated city’s limits, the city will likely have jurisdiction. If you are located in an unincorporated area of the county, the county will likely have jurisdiction.

For cannabis products during the regulatory transition period, can the exit packaging be the same as the secondary packaging?

No. Exit packaging is the package that a consumer’s purchased product is placed into by a retailer so it is ready to leave the store after the sale is complete. The Bureau of Cannabis Control has outlined requirements in their regulations for exit packaging used by retailers. Manufacturers are responsible for packaging and labeling their products in its final form, prior to release to a distributor as a finished product. This includes ensuring that the packaging of the finished product is child resistant. Secondary package is a child-resistant outer package, such as a bag, that a manufacturer can place their product in to fulfill the child-resistant packaging requirement.

What are the requirements for cannabis packages and cannabis labels?

Cannabis product packaging cannot resemble traditionally available food packages and must be tamper-evident, re-sealable if the product includes multiple servings, and child-resistant. In addition, packaging for edibles must be opaque. All manufactured products must be packaged according to regulatory standards before they are released to a distributor. Cannabis product labeling may not refer to the product as a candy, be attractive to children, make health claims or include cartoons. The labeling requirements fall into two categories: primary panel requirements and informational panel requirements. The primary panel is the portion of the label that is most likely to be displayed to the consumer at retail. Primary panel labeling must include: • The identity of the product • The amount of THC/CBD in the package • The CDPH-issued universal symbol • The net weight or volume In addition, primary paneling for edible products must include the words cannabis-infused and contain the amount of THC/CBD per serving. The informational panel can be located anywhere else on the package. Informational panel labeling requirements include: • The manufacturer's name and contact information (website or phone number) • The date the product was manufactured • The government warning statement • The ingredient list • Instructions for use • The expiration date • The unique ID/batch number In addition, the informational panel for edible products must also contain allergen information, a list of artificial food colorings and basic nutritional information (the amount of sodium, sugar, carbohydrates and fat per serving). Medicinal products must be labeled For Medicinal Use Only.

Regarding quantity, what is the cannabis license limit a person can have?

Unless otherwise prohibited, there is no limit on the number of licenses a person can have.

Regarding Manufactured Cannabis Products, what is an Edible?

Edibles are cannabis products that can be taken orally. Edibles include vape cartridges, extracts, capsules, and tinctures.


State Authority & Contact:

Manufactured Cannabis Safety Branch (CA Department of Public Health)
PO Box 997377, MS 7606, Sacramento CA 95899-7377
Email: mcsb@cdph.ca.gov
Phone: 855-421-7887

Scope of Licenses:

MCSB will offer four license types for cannabis manufacturers (7, 6, N, P):
  • A-Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
  • M-Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
  • A-Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
  • M-Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
  • A-Type N – for infusions
  • M-Type N – for infusions
  • A-Type P – for packaging and labeling only
  • M-Type P – for packaging and labeling only
  • Type S, for shared-use manufacturing facilities. This license type will be for businesses and facility owners that alternate use of a manufacturing premises. More information on this license type will be available soon.


  • Each license type is inclusive of the types in the list below it. For example, a Type 7 licensee would be able to perform Type 6, N or P tasks. A Type 6 license could perform Type N or P tasks. A Type N licensee would be able to perform Type P tasks.

Requirements:

  • Written statement, signed by the landlord, allowing cannabis manufacturing on the property
  • Diagram of the premise
  • Closed loop system certification, signed by a licensed engineer (for manufacturers using volatile solvents or CO2 extraction methods)
  • Proof of $5000 surety bond
  • Local authorization
  • Live Scan
  • California Tax Permit
  • FEIN
  • Written Procedures for inventory control
  • Written Procedures for quality control
  • Written Procedures for transportation
  • Written Procedures for security
  • Written Procedures for cannabis waste disposal
  • Compliance with THC Limits
  • Compliance with Packaging & Labeling
  • Compliance with Product Standards and Prohibited Products

Licensing Fees:

The licensing fees are scaled based on maximum revenue and they range from $2,000 to $75,000 for each licensed premises.
  • Annual Gross Revenue up to $100,000 (Tier I): Fee of $2,000
  • Annual Gross Revenue $101,000 to $500,000 (Tier II): Fee of $7,500
  • Annual Gross Revenue $500,001 to $1,500,000 (Tier III): Fee of $15,000
  • Annual Gross Revenue $1,500,001 to $3,000,000 (Tier IV): Fee of $25,000
  • Annual Gross Revenue $3,000,001 to $5,000,000 (Tier V): Fee of $35,000
  • Annual Gross Revenue $5,000,001 to $10,000,000 (Tier VI): Fee of $50,000
  • Annual Gross Revenue over $10,000,001 (Tier VII): Fee of $75,000

Application Fee - Processing fee of $1,0000 per license

Forms:


Resources:








California Universal Symbol for Cannabis


California Universal Symbol for Cannabis

Download PNG file or Download JPG file



This site focuses or refers to information and services regarding licenses for both medicinal and adult-use cannabis manufacturing at the same premises local jurisdiction microbusinesses delivery vehicle $3,000 of cannabis goods cannabis products in container or wrapper for sale access to the area(s) minimum standards for extraction processes M-license supply chain tamper-evident conditional license sampling standards medicinal and adult-use markets paper inserted into the packaging commercial cannabis manufacturers tinctures annual license application persons 21 years of age or older Department of Food and Agriculture’s CalCannabis Cultivation Licensing division 2018 resolutions 2018 regulations shared-use manufacturing facilities product formulation immature live plants and seeds being transported from a licensed nursery BUREAU OF CANNABIS CONTROL re-sealable testing lab at least 99% purity Extractions using CO2 MCSB amount of THC/CBD per serving and per package three cannabis licensing authorities cannabis training Manufacturing (non-volatile) certified by a California-licensed engineer inventory cannabis adult-use products Poison Prevention Packaging Act of 1970 (PPPA) required limits disclosure of all criminal convictions good manufacturing practices Temporary Cannabis Event Food-grade Butter/Oil at least 20% ownership interest 2018 recent news Track and Trace onsite consumption of cannabis goods CALIFORNIA BUREAU OF CANNABIS CONTROL licensing cannabis distributors identity of the product contaminant free destruction of cannabis goods dried flower Non-Storefront Retailer (Type 9) convicted of a substantially related crime licensed cannabis manufacturers 2018 important information THC levels A-licensees supplemental label Local Authorization Attachment commercial cannabis manufacturing activity workshops hosted by the Bureau of Cannabis Control Premises Diagram CO2 and ethanol extractions financial interest holder alcoholic beverages evidence of the legal right to occupy the premises disposal edibles packaging opaque persons with a financial interest in the cannabis business Distributor Transport Only surety bond Transition Period licensing cannabis retailers evidence of rehabilitation recordkeeping period of 120 days local jurisdiction’s requirements Transport vehicles alarm system security 2018 proposed changes basic nutritional information Cultivation less than 10,000 CDTFA seller’s permit tobacco products loop system scaled to the gross annual revenue of the licensed premises three state cannabis-licensing authorities medicinal commercial cannabis activity cultivation Moisture Content Testing California Public Records Act Licensee Lookup Tool concentrate Retailer (nonstorefront) manufacturers who package for other producers security and cannabis waste disposal secondary packaging Business and Professions Code section 26050.1 Medicinal and Adult-Use Cannabis Regulation and Safety Act Manufactured Cannabis Safety Branch (MCSB) stickers 2018 laws 2018 fines cannabis market quality control Standard Operating Procedures (SOPs) Financial Interest Identifying information regulations for medicinal and adult-use cannabis infusion 2018 updates sanitary workplaces testing methods licensing and regulating commercial cannabis manufacturers activity for a period of 120 days sanitary and hazard-free environment Proposition 64: The Adult Use of Cannabis Act of 2016 child-resistant outer package compliance with local jurisdiction packaging opaque exit package Bond and Insurance Information protocol managing member amount of THC content small product packaging Water/Food-grade Dry Ice Business Organizational Completed Temporary License Application Form medicinal and adult-use commercial cannabis activity manufacturer's name ingredient list commercial cannabis activity inventory and quality control Bond in the amount of $5,000 cannabis cultivation licensing structure and formation documents 600 foot radius of a school retailers property for the commercial cannabis activity shaped like a human, animal, insect, or fruit medicinal and adult use cannabis goods transported together Category II Residual Pesticides Testing licensing cannabis microbusinesses Carbon Dioxide (CO2) local jurisdiction’s ordinances and regulations waste disposal ownership premises is not within a Government no infusion of nicotine highly-concentrated oils or waxes periods of 90 days extensions Owner transport cannabis goods to retailer Mycotoxins Testing labeling Industrial Hemp Advisory Board Cannabis Manufacturing inhalable cannabis packaging and labeling Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) licensed physical location (premises) Retailer (Type 10) state cannabis licensing Proposition 65 Local Authorization ISO/IEC 17025 accreditation loan provided to a commercial cannabis business entry into the legal, regulated market health impacts of cannabis Water Activity Testing of Solid or Semi-Solid Edibles Microbial Impurities Testing (Escherichia coli and Salmonella spp.) track and trace system Individual Owner cannabis event organizer license chain of custody 2018 revisions Category II Residual Solvents and Processing Chemicals Testing Foreign Material Testing A-license and an M-license for the same commercial cannabis activity remove THC/CBD The California Department of Public Health's Arranging for laboratory testing Physical address no infusion of alcohol 600-foot radius of a school cannabis industries pre-made or purchased temporary license Terpenoids Testing cannabis cartoons child-resistant packaging transporting cannabis goods no added caffeine transportation of cannabis goods Personnel Requirements commercial cannabis manufacturing Form # CDPH-9041 Seller’s permit number regulations for medical and adult-use cannabis in California Cannabinoids Testing aggregate interest of 20% or more 2,000 mg of THC per package for the medicinal-use market Microbusiness licensing cannabis third-party testing laboratories secondary package contaminants Heavy Metals Testing vape cartridges manufacturing licensing scheme local jurisdiction authorization Application Checklist mandated warning statements comply with all packaging and labeling requirements commercial kitchens 100 mg of THC per package Microbial Impurities Testing (A. fumigatus, A. flavus, A. niger, A. terreus) Live Scans for each owner unique ID/batch number amount of sodium shares of stock that are less than 5% of the total shares in a publicly traded company highly-concentrated THC/CBD such as oil, wax and resin Mechanical Premises Information emergency regulations edible products written procedures for inventory control exception for testing laboratories procedures for inventory control some nutritional facts primary panel requirements ANTICIPATED ANNUAL (NONTEMPORARY) LICENSE APPLICATION REQUIREMENTS Business Information diagram of the business’s layout regulatory framework Vehicle Requirements must enter certain events supply chains for medicinal and adult-use cannabis products an officer or director of a cannabis business cannabis plants LICENSE APPLICATION REQUIREMENTS exit packaging sugar 120 days manufacturing (Level 1 manufacturing, Type 6) public health and safety carbohydrates and fat per serving conducting quality assurance review packaging and labeling requirements for pre-rolls Local Jurisdictions online licensing system CDPH-issued universal symbol operating procedures The Manufactured Cannabis Safety Branch (MCSB) informational panel Homogeneity Testing of Edible Cannabis Products Category I Residual Solvents and Processing Chemicals Testing Proposed Section 40133 secured area separate applications A-license and an M-license 2018 problems extracts licensed premises hydrocarbon-based solvents laboratory quality assurance Fingerprints Department of Public Health’s Manufactured Cannabis Safety Branch sales of cannabis goods medicinal and adult-use cannabis manufacturing Category I Residual Pesticides Testing Distributor transport manufacturing practices purchasing cannabis products on tribal lands product guidelines valid waiver manufacture cannabis products list of artificial food colorings CDPH-9041 MANUFACTURED CANNABIS SAFETY BRANCH definition of owner manufacturing activities requiring refrigeration testing of cannabis goods Conducting quality assurance review of cannabis goods transportation and security Edibles– Products Temporary License Application Medical Cannabis Regulation and Safety Act of 2015 CalCannabis Cultivation Licensing Temporary License Application Information California Department of Public Health (CDPH) Ethanol equity interest in a commercial cannabis business Temporary event up to 4 days Criminal History final form operating premises Operating Procedures licensed cannabis cultivators meat and seafood, and other products storage of cannabis goods the commercial medicinal and adult-use (recreational) Department of Consumer Affairs’ Bureau of Cannabis Control shipping manifest Labor peace agreement nonlaboratory quality control limited to a maximum of 10 mg of THC per serving designated structure packaging and labeling requirements cannabis sales and/or consumption disposal and destruction methods California Department of Public Health onsite sale and consumption of cannabis goods commercial cannabis manufacturing in California Manufactured Cannabis Licensing System (MCLS) 2018 compliance member manager 2018 issues public Licensee Lookup Tool M-licensees premises diagram Percentage of ownership capsules The Bureau of Cannabis Control (BCC) topicals limited to a maximum of 1,000 mg per package product as a candy prohibited commercial cannabis products cannabis waste government warning statement label Local Issuing Authority distributors consumption of alcohol or tobacco hang tag or a peel-back label MCSB’s temporary license application extraction manufacturing cannabis products Butane/Hexane/Propane adult-use commercial cannabis activity Incorporating THC/CBD concentrates Licensee Information Office of Environmental Health Hazard Assessment (OEHHA) medicinal and adult-use or both markets Manufactured Cannabis Safety Branch Licensees compliance with regulations Type S share facility space finished product Premises diagram cultivation (on an area less than 10,000 square feet) licensed cannabis distributors waste management laws testing laboratories license review process transportation allergen information motor carrier permit volatile solvent manned motor vehicle investment into a commercial cannabis business payable to the state of California health claims labels not be attractive Financial information 2018 new laws potentially-hazardous foods A-license and more.

In addition, Immature plant Primary panel In-process material Type 3A (Cultivation; Indoor; Medium) Type S (coming soon, shared-use manufacturing facilities) Type 1B (Cultivation; Specialty mixed-light; Small) Quality control personnel Hazard Premises Small Mixed-Light Tier 2 Watts per square foot Volatile solvent Cannabis product Type 10 (Retailer) Specialty Cottage Mixed-Light Tier 1 Outdoor cultivation Pre-roll infused butters and oils as concentrates Indoor cultivation adulteration cannabis concentrates Medium Mixed-Light Tier 1 Type 2 (Cultivation; Outdoor; Small) Small Outdoor Cultivation site Distribution Track-and-trace systems Quality Informational panel Type 6 (Manufacturer 1) Extraction: Non-volatile Solvents, Mechanical Methods Applicant Pest Commercial cannabis activity Department Processing aid Bureau CBD from industrial hemp Sanitize Batch Lot Small Indoor THC Medium Outdoor Topical cannabis product Canopy Mature plant Mixed-light Tier 1 Unique identifier products similar to traditional food products prohibited Processor Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter) Process Package cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints Adulterated Finished product Universal symbol Mixed-light cultivation Type N – for infusions Type 1 (Cultivation; Specialty outdoor; Small) Product Identity Type 3 (Cultivation; Outdoor; Medium) Wet weight DPH-17-010E Type 8 (Testing Laboratory) Qualified individual Raw material gross annual revenue for first year in operation under MAUCRSA Type 13 (Distributor Transport Only) Kief Proposition 65 warning statement Type 5 (Cultivation; Outdoor; Large) track and trace system Manufacturer licensee Harvest Batch Type P – for packaging and labeling only Dried flower alternate use of a manufacturing premises Extraction Medium Mixed-Light Tier 2 Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane) Component Quarantine Nursery MCSB 90-day extension periods Specialty Cottage Outdoor Contact surface Type 5A (Cultivation; Indoor; Large) Limited-access area Nonvolatile solvent Net weight Quality control operation Actual yield Medium Indoor Commercial-grade, non-residential door lock Ingredient Nonmanufactured cannabis product infused pre-rolls M-license Specialty Cottage Mixed-Light Tier 2 CBD Specialty Cottage Indoor Pathogen Small Mixed-Light Tier 1 Infusion Specialty Outdoor list of cannabis manufacturers Theoretical yield Edible cannabis product Type 2B (Cultivation; Mixed-light; Small) Manufacture Type 2A (Cultivation; Indoor; Small) Adequate Type 3B (Cultivation; Mixed-light; Medium) Allergen cross-contact Type N Infusions (optional packaging and labeling) Type P Packaging & Labeling Only Type 11 (Distributor) Verification Type 9 (Non-Storefront Retailer) Adult-use Market Flowering Type 12 (Microbusiness) Type 1C (Cultivation; Specialty cottage; Small) Holding Mixed-light Tier 2 Specialty Mixed-Light Tier 1 Preventive controls package flower or pre-rolls Request for Live Scan Serving Labeling Type 4 (Cultivation; Nursery) Allergen Type 7 (Manufacturer 2) Extraction: Volatile Solvents Licensee Cultivation Specialty Mixed-Light Tier 2 THC limit of 10 milligrams per serving and 100 milligrams per package Type 5B (Cultivation; Mixed-light; Large) Personnel Microorganisms UID Monitor Specialty Indoor Type 1A (Cultivation; Specialty indoor; Small) Type 14 (Cannabis Event Organizer) Validation Track and trace system Environmental pathogen Processing and more.


Disclaimer: Informational and educational purposes. Self-help services (not legal advice). Site is not affiliated with any state agency. Note that site might not contain the most updated information. Your receipt of any information from this site does not create a relationship. Prior results do not guarantee or suggest a similar result in other matters. No promise is made with regard to services or content's reliability, availabilty, or ability to meet any needs. Information and services provided "AS IS."

All Rights Reserved