Cannabis Consulting in California
California Cannabis California Cannabis Business License Compliance Manufacturer 1 Extraction Non Volatile Solvents Medicinal M Type 6

California Cannabis Business License Compliance Manufacturer 1 Extraction Non Volatile Solvents Medicinal M Type 6, 2019 Local News, Information & Updates


California Cannabis Manufacturers


Frequently Asked Questions

For the newly regulated cannabis market in California, what is the licensing transition period?

The three licensing authorities have outlined a six-month transition period to address existing product and support a smooth transition into a newly regulated market. The transition period allows for existing product to move though the commercial cannabis market if it meets basic requirements.

What's the difference between cannabis exit packaging and cannabis secondary packaging?

No. Exit packaging is the package that a consumer’s purchased product is placed into by a retailer so it is ready to leave the store after the sale is complete. The Bureau of Cannabis Control has outlined requirements in their regulations for exit packaging used by retailers. Manufacturers are responsible for packaging and labeling their products in its final form, prior to release to a distributor as a finished product. This includes ensuring that the packaging of the finished product is child resistant. Secondary package is a child-resistant outer package, such as a bag, that a manufacturer can place their product in to fulfill the child-resistant packaging requirement.

What types of cannabis licenses exist for the state of California?

MCSB will offer four license types for cannabis manufacturers:
Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
Type N – for infusions
Type P – for packaging and labeling only
Each license type is inclusive of the types in the list below it. For example, a Type 7 licensee would be able to perform Type 6, N or P tasks. A Type 6 license could perform Type N or P tasks. A Type N licensee would be able to perform Type P tasks.
In addition to these four licenses, MCSB is developing a fifth license type, Type S, for shared-use manufacturing facilities. This license type will be for businesses and facility owners that alternate use of a manufacturing premises. More information on this license type will be available soon.
More information about licenses for retailers, distributors, third-party testing laboratories and microbusinesses can be found on the Bureau of Cannabis Control's website. More information about licenses for cultivators can be found on the CalCannabis Cultivation Licensing website.

What does MCSB stand for?

Manufactured Cannabis Safety Branch

For A-licenses and M-licenses applications, does a cannabis business have to pay a fee for each if it applies for both types of licenses?

A (adult-use) and M (medicinal use) are two different categories of license. If you apply for both A- and M- annual licenses, you will pay two separate license application fees, and annual license fees – one for each license. The license fees are based on the gross annual revenue of the product produced under each license. For example, the license fee paid for the M-License is based on the gross annual revenue of the medicinal-use product manufactured at the licensed premises; the license fee paid for the A-License is based on the gross annual revenue of the adult-use product manufactured at the licensed premises.

During the regulatory transition period, what are the requirements for the packaging and labeling?

During the transition period, which lasts from January 1 until July 1, 2018, cannabis products may enter the commercial cannabis market if they have child-resistant packaging and the label contains the government warning statement and the amount of THC per serving. If the primary packaging is not child-resistant, the product may be placed in secondary packaging that is child-resistant to fulfill this requirement.

Where can a cannabis business get forms that are required for the Live Scan background checks?

The Manufactured Cannabis Safety Branch is currently finalizing the information needed for this process and will post the required “Request for Live Scan” form on the website soon.

What is an annual license?

An annual license is valid for 1 year allowing for a cannabis business to conduct commercial cannabis activity.

If the cannabis business has multiple locations, will the cannabis temporary license cover each location of the cannabis business?

Temporary licenses are only valid for one premises. If your business has multiple premises where cannabis manufacturing occurs, you will need to apply for a temporary license for each premises. Beginning January 1, 2018, only licensed businesses will be able to conduct commercial cannabis activity and may only do business with other licensees. If a business is cited for operating without a license, the business might not be able to obtain a license in the future.

For cannabis products during the regulatory transition period, can the exit packaging be the same as the secondary packaging?

No. Exit packaging is the package that a consumer’s purchased product is placed into by a retailer so it is ready to leave the store after the sale is complete. The Bureau of Cannabis Control has outlined requirements in their regulations for exit packaging used by retailers. Manufacturers are responsible for packaging and labeling their products in its final form, prior to release to a distributor as a finished product. This includes ensuring that the packaging of the finished product is child resistant. Secondary package is a child-resistant outer package, such as a bag, that a manufacturer can place their product in to fulfill the child-resistant packaging requirement.

How much is the CDPH fees for a cannabis temporary license?

There is no fee to apply for a temporary license.

Can a Cannabis Manufacturer manufacture cannabis products in a commercial kitchen?

At this time, the use of commercial kitchens, in which multiple businesses share use of a single manufacturing space, is not permitted. The Manufactured Cannabis Safety Branch is working diligently to develop a regulatory framework which would allow for shared-use manufacturing facilities. Until this new regulatory language is released and approved, we are not able to issue licenses or accept applications for shared spaces.

For cannabis pre-rolls, what are the labeling and packaging requirements?

Pre-rolls that only contain flower must follow all packaging and labeling standards outlined in the California Business and Professions Code. Pre-rolls that contain both flower and concentrates (infused pre-rolls) must meet all packaging and labeling required of manufactured products, as outlined in the MCSB regulations for cannabis manufacturers.

For a commercial cannabis manufacturing business, what is the criteria to determine if a cannabis product is considered edible or non-edible?

Edible cannabis products are products that are similar to traditional food products, such as cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints. Edible products have a THC limit of 10 milligrams per serving and 100 milligrams per package for both the medicinal and adult-use markets. Cannabis concentrates are not classified as edible products. Concentrates include products like tinctures, capsules, extracts, butter, cooking oils and vape cartridges. Concentrates have a THC limit of 1,000 milligrams per package for the adult-use market and 2,000 milligrams per package for the medicinal market. If you have a question about how your product is classified, email MCSB@cdph.ca.gov.

After a cannabis business receives a cannabis temporary license, how does it apply for the cannabis annual license?

Annual licenses are being accepted through our online system, the Manufactured Cannabis Licensing System (MCLS). MCLS is available to access now on the Licensing page of the CDPH website.

How does a cannabis business acquire a cannabis local authorization and where can it be obtained?

Local authorization comes from the city or county that has jurisdiction where you have your manufacturing facility. If you are located within an incorporated city’s limits, the city will likely have jurisdiction. If you are located in an unincorporated area of the county, the county will likely have jurisdiction.

If a local jurisdiction has not yet ruled on a cannabis activity, can a cannabis business still apply for a cannabis temporary license or annual license?

By state law, temporary licenses require local authorization to operate a cannabis business. If your local jurisdiction is not providing authorization, you will not be able to apply for a temporary license. If the city or county does not have any ordinances in place specific to cannabis, you must comply with all other rules that would apply to a similar business or facility in order to hold an annual license for cannabis manufacturing.

Can a business extend their MCSB temporary license?

Yes, a business can extend their MCSB temporary license by 90 days if submitted with a complete annual license application, subject to the discretion of MCSB.

What is a temporary license?

A temporary license is valid for 120 days and is a MCSB conditional license allowing for a cannabis business to conduct commercial cannabis activity.

When are cannabis businesses required to pay for the cannabis annual license application and fess for licensing?

The application fee is paid when the annual license application is submitted. The licensing fee is paid when the annual license application is approved.

Does a Cannabis business need a manufacturing license if it produces Cannabidiol (CBD) products?

If the CBD in your products comes from a cannabis plant, you will need a license from our office to conduct commercial cannabis manufacturing. However, CBD from industrial hemp is not regulated under the state’s cannabis regulatory framework. The California Department of Food & Agriculture’s Industrial Hemp Advisory Board has some information on the current state laws surrounding industrial hemp and a list of FAQs on their website.

During the transition period, what are cannabis product requirements for THC limits?

All cannabis products manufactured on or after January 1, 2018 must meet regulatory THC limits. Edible products cannot contain more than 10 milligrams per serving or 100 milligrams per package. Non-edible cannabis products cannot contain more than 1,000 milligrams per package (adult-use) or 2,000 milligrams per package (medicinal).

Do cannabis products require Proposition 65 language on the labeling?

Cannabis businesses must follow all applicable state laws, just like any other business operating in the state. Therefore if the Office of Environmental Health Hazard Assessment (OEHHA) requires your product to contain the Proposition 65 warning statement, then you must follow state law and include that information. OEHHA can provide more information about whether or not it is required for your product.

What are the cannabis packaging requirements for child-resistant packaging?

Our regulations require that packaging be child-resistant, as defined in section 1700 of the federal Poison Prevention Packaging Act of 1970 (PPPA). The Consumer Product Safety Commission, which administers the PPPA, has an online guide to child-resistant packaging. The PPPA outlines testing procedures for determining whether your product meets the standard of “child resistant.” Testing procedures can be found in the Code of Federal Regulations, Part 1700, Poison Prevention Packaging. If your product packaging meets the guidelines in the PPPA, it can be used for child-resistant packaging.

Are cannabis oils classified as an edible product or a concentrate?

The Manufactured Cannabis Safety Branch has classified infused butters and oils as concentrates.

What are the requirements for cannabis products manufactured during the transition period?

Products manufactured during the transition period, from January 1 until prior to July 1, 2018, must meet THC limits, product standards and basic packaging and labeling requirements. Cannabis products must be in child-resistant packaging, and the label must contain the government warning statement and amount of THC/CBD per serving and per package.

Regarding Manufactured Cannabis Products, what is an Extraction activity?

Extraction is removal of THC/CBD from cannabis plants via a mechanical method or chemical solvent method.

How does a Cannabis business apply for a cannabis temporary license?

A cannabis business can access the temporary license application on the CDPH website. The completed application and a copy of the business's local city or county authorization can be emailed to mcls@cdph.ca.gov or mailed to the following address:
CDPH – Manufactured Cannabis Safety Branch
Attn: Licensing Unit
PO Box 997377, MS 7606
Sacramento, CA 95899-7377

What does cannabis local authorization mean?

Both Proposition 64 and the Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) established a dual licensing structure in which both the state and local governments play a role in setting guidelines and public health standards for cannabis businesses. For temporary licenses, you must have local authorization to operate a cannabis business. This may be a cannabis permit, letter of acknowledgement, or another form of local authorization. You are required to submit a copy of this local authorization with your temporary license application. For annual licenses, you must be in compliance with all local ordinances. If your local jurisdiction has passed an ordinance allowing for cannabis manufacturing, you must comply with any rules established by these ordinances. If the city or county does not have any ordinances in place specific to cannabis, you must comply with all other rules that would apply to a similar business or facility. If the local jurisdiction has banned commercial cannabis manufacturing, you will not be able to obtain a state cannabis license.

How much information regarding my Cannabis Manufacturing business is publicly available?

The Manufactured Cannabis Safety Branch (MCSB) website includes a public Licensee Lookup Tool which contains the business name, license type, license number, city and county, and license expiration date. Additional information will be available to members of the public through a Public Records Act request.

Does a Cannabis business need two separate licenses to do two (Medicinal and recreational Adult-use) types of manufacturing?

You will only need two types of manufacturing licenses for the same premises if you plan to create both adult-use and medicinal products. If you are conducting manufacturing for both the medicinal and adult-use markets, you will need both M- and A-licenses to operate in both of those markets. However you do not need two licenses to conduct different types of manufacturing operations within one of those markets at the same premises, as long as all activities are disclosed on the application. A Type 7 licensee can also conduct Type 6, N & P activities on the same premises. A Type 6 licensee can conduct Type N & P activities on the same premises. A Type N licensee can conduct Type P activities on the same premises.

What are the Cannabis state licensing authorities?

There are three state licensing authorities that each regulate a different aspect of the commercial cannabis market:
• Bureau of Cannabis Control, CA Department of Consumer Affairs – responsible for licensing cannabis retailers, distributors, third-party testing laboratories and microbusinesses.
• Manufactured Cannabis Safety Branch, CA Department of Public Health – responsible for licensing manufacturers of cannabis products
• CalCannabis Cultivation Licensing, CA Department of Food & Agriculture – responsible for licensing cannabis cultivators and operating the state's Track-and-Trace system

Can a Cannabis business package pre-rolls or flowers if a Cannabis business is a licensed manufacturer?

Yes, manufacturers may package flower or pre-rolls. Flower and pre-rolls that only contain flower must meet the packaging and labeling standards outlined in the California Business and Professions Code. Pre-rolls that also contain concentrates (“infused” pre-rolls) must meet the packaging and labeling requirements for manufactured products that are outlined in the MCSB regulations for cannabis manufacturing.

For how long does it take to process a cannabis temporary license application?

MCSB is committed to processing applications for temporary licenses as quickly as possible to minimize disruption to the market. Once an application is received, it will be reviewed for completeness and the city or county office will be contacted to verify the local authorization. The local office will be given up to 10 days to respond. If the local office confirms that the business is authorized to conduct commercial cannabis activities, MCSB will issue the license. No licenses will have an effective date prior to January 1, 2018. If commercial cannabis activity is banned in the city or county where your premises is located, you will not be able to obtain a state cannabis license.

Regarding Manufactured Cannabis Products, what is a Concentrate?

Concentrates are cannabis products that contain concentrated THC/CBD. Concentrates include resin, wax and oil.

For a cannabis A-license, would a cannabis manufacturer be allowed to purchase from and sell to cannabis M-license businesses?

During the transition period, which lasts from January 1 until July 1, 2018, you can do business with adult-use licensees or medicinal use licensees, regardless of whether you have an A- or M- license. Beginning July 1, 2018, A-licensees can only do business with A-licensees, and M-licensees can only do business with M-licensees.

Regarding Manufactured Cannabis Products, what is an Infusion activity?

Infusion means putting THC/CBD concentrates directly into a product.

Does a temporary license or annual license require a local authorization?

Yes

What is a cannabis local authorization and who issues it?

A local authorization is a document from your local city or county that permits you to operate a cannabis business. This documentation will look different in every jurisdiction but may be a cannabis business permit, temporary cannabis license or letter of authorization to operate a cannabis business. Contact your city or county government office for more information about the procedures in your jurisdiction.

If the cannabis labeling does not fit on the package, how should the information be added?

The primary panel labeling information and the government warning statement must be on the package itself. If your product packaging is small, and you cannot fit all of the informational labeling on the package, you can use a supplemental label for those additional requirements. Examples of supplemental labels include a paper inserted into the packaging, a hang tag or a peel-back label.

Where can a Cannabis Manufacturer find more information on cannabis' health issues?

The California Department of Public Health (CDPH) is leading a campaign called Let's Talk Cannabis, which serves as a resource for Californians seeking fact-based information about cannabis and its effects on their health. More information about the health impacts of cannabis can be found on the CDPH Let's Talk Cannabis website.

Regarding quantity, what is the cannabis license limit a person can have?

Unless otherwise prohibited, there is no limit on the number of licenses a person can have.

To manufacture cannabis products, does the business have to be licensed?

Yes, the business must be licensed with MCSB (Manufactured Cannabis Safety Branch) in order to legally manufacture cannabis goods.

What does the California MCSB do?

The Manufactured Cannabis Safety Branch (MCSB), housed within the California Department of Public Health, licenses and regulates manufacturers of commercial cannabis products.

What are the requirements for cannabis packages and cannabis labels?

Cannabis product packaging cannot resemble traditionally available food packages and must be tamper-evident, re-sealable if the product includes multiple servings, and child-resistant. In addition, packaging for edibles must be opaque. All manufactured products must be packaged according to regulatory standards before they are released to a distributor. Cannabis product labeling may not refer to the product as a candy, be attractive to children, make health claims or include cartoons. The labeling requirements fall into two categories: primary panel requirements and informational panel requirements. The primary panel is the portion of the label that is most likely to be displayed to the consumer at retail. Primary panel labeling must include: • The identity of the product • The amount of THC/CBD in the package • The CDPH-issued universal symbol • The net weight or volume In addition, primary paneling for edible products must include the words cannabis-infused and contain the amount of THC/CBD per serving. The informational panel can be located anywhere else on the package. Informational panel labeling requirements include: • The manufacturer's name and contact information (website or phone number) • The date the product was manufactured • The government warning statement • The ingredient list • Instructions for use • The expiration date • The unique ID/batch number In addition, the informational panel for edible products must also contain allergen information, a list of artificial food colorings and basic nutritional information (the amount of sodium, sugar, carbohydrates and fat per serving). Medicinal products must be labeled For Medicinal Use Only.

If any criminal history exists, would that produce an automatic denial of the cannabis annual license business application?

There are no mandatory denials for criminal history. The Manufactured Cannabis Safety Branch will be evaluating each applicant’s history on a case-by-case basis. Convictions that are considered “substantially related” and possibly could lead to denial are serious and violent felonies, drug offenses involving minors, and violations of food safety laws. If you have this type of conviction, you can submit evidence of rehabilitation and a description of circumstances. This information will be considered during the application review process.

Is there any application fee or licensing fee for MCSB's temporary licenses?

No, there is no application fee or licensing fee for MCSB's temporary licenses.

To receive a cannabis temporary license, is the business required to have the adult use licenses (A-license) AND the medicinal (M-license)?

During the transition period, which lasts from January 1 until July 1, 2018, you can do business with adult-use licensees or medicinal use licensees, regardless of whether you have an A- or M- license. Beginning July 1, 2018, A-licensees can only do business with A-licensees, and M-licensees can only do business with M-licensees.

Does a cannabis business need to also apply for a temporary license if it applies for an annual license?

Beginning January 1, 2018, you must have a license to operate a cannabis business within the state of California. You can apply for an annual license whether or not you have a temporary license.

What is the limit to the number of Cannabis licenses the California Department of Public Health (CDPH) can issue?

No limit is in place for the number of licenses that CDPH will issue.

Are butters classified as an edible product or a concentrate?

The Manufactured Cannabis Safety Branch has classified infused butters and oils as concentrates.

Can a cannabis business operate prior to being issued and approved for a cannabis temporary license?

Beginning January 1, 2018, you must have a license to operate a cannabis business within the state of California.

Where can the cannabis universal symbol be downloaded?

Links to download the universal symbol are on the Regulations page of the state website. It is available in hi-res JPG, PNG and PDF files.

For how long can a cannabis business operate under a cannabis temporary license?

A temporary license is valid for 120 days from the date of the license. MCSB may approve 90-day extension periods if the holder of the temporary license submits a complete annual license application prior to the expiration date of the temporary license.

For MAUCRSA, if a cannabis business does not yet know what the gross annual revenue shall be for the initial year of operation, what should be listed?

For the first year of operations, the gross annual revenue is an estimate. In subsequent years, the gross annual revenue is based on the prior year’s taxes. A good-faith attempt must be made to create an accurate first year estimate. When you submit your annual license application, you will attest under penalty of law that the information in your application is true and accurate.

Regarding Manufactured Cannabis Products, what is an Edible?

Edibles are cannabis products that can be taken orally. Edibles include vape cartridges, extracts, capsules, and tinctures.

Is there a place to view a list of recognized cannabis manufacturers?

A Licensee Lookup Tool is available on the Licensing page of the CDPH website.

Regarding commercial cannabis manufacturing, can the public search and view a list of local jurisdictions?

The Manufactured Cannabis Safety Branch does not have a list of local jurisdictions that permit commercial cannabis manufacturing.

Can a Cannabis Manufacturer manufacture both adult-use and medicinal cannabis products on the same premises?

Yes, a business can hold licenses for both medicinal and adult-use cannabis manufacturing at the same premises. During the transition period, which is in effect from January 1 to July 1, 2018, products will be able to cross between the medicinal and adult-use markets. Beginning on July 1, 2018, the supply chains for medicinal and adult-use cannabis products must be kept separate.

Does a Manufacturing business need to obtain a license from CDPH?

Yes, any person or business must obtain a manufacturing license in order to engage in commercial cannabis manufacturing. Each license must have one category and one type.

Are only cannabis edible products required to have the cannabis universal symbol?

All manufactured cannabis products – both edible and non-edible – must have the universal symbol on the label’s primary panel.


State Authority & Contact:

Manufactured Cannabis Safety Branch (CA Department of Public Health)
PO Box 997377, MS 7606, Sacramento CA 95899-7377
Email: mcsb@cdph.ca.gov
Phone: 855-421-7887

Scope of Licenses:

MCSB will offer four license types for cannabis manufacturers (7, 6, N, P):
  • A-Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
  • M-Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane)
  • A-Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
  • M-Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter)
  • A-Type N – for infusions
  • M-Type N – for infusions
  • A-Type P – for packaging and labeling only
  • M-Type P – for packaging and labeling only
  • Type S, for shared-use manufacturing facilities. This license type will be for businesses and facility owners that alternate use of a manufacturing premises. More information on this license type will be available soon.


  • Each license type is inclusive of the types in the list below it. For example, a Type 7 licensee would be able to perform Type 6, N or P tasks. A Type 6 license could perform Type N or P tasks. A Type N licensee would be able to perform Type P tasks.

Requirements:

  • Written statement, signed by the landlord, allowing cannabis manufacturing on the property
  • Diagram of the premise
  • Closed loop system certification, signed by a licensed engineer (for manufacturers using volatile solvents or CO2 extraction methods)
  • Proof of $5000 surety bond
  • Local authorization
  • Live Scan
  • California Tax Permit
  • FEIN
  • Written Procedures for inventory control
  • Written Procedures for quality control
  • Written Procedures for transportation
  • Written Procedures for security
  • Written Procedures for cannabis waste disposal
  • Compliance with THC Limits
  • Compliance with Packaging & Labeling
  • Compliance with Product Standards and Prohibited Products

Licensing Fees:

The licensing fees are scaled based on maximum revenue and they range from $2,000 to $75,000 for each licensed premises.
  • Annual Gross Revenue up to $100,000 (Tier I): Fee of $2,000
  • Annual Gross Revenue $101,000 to $500,000 (Tier II): Fee of $7,500
  • Annual Gross Revenue $500,001 to $1,500,000 (Tier III): Fee of $15,000
  • Annual Gross Revenue $1,500,001 to $3,000,000 (Tier IV): Fee of $25,000
  • Annual Gross Revenue $3,000,001 to $5,000,000 (Tier V): Fee of $35,000
  • Annual Gross Revenue $5,000,001 to $10,000,000 (Tier VI): Fee of $50,000
  • Annual Gross Revenue over $10,000,001 (Tier VII): Fee of $75,000

Application Fee - Processing fee of $1,0000 per license

Forms:


Resources:








California Universal Symbol for Cannabis


California Universal Symbol for Cannabis

Download PNG file or Download JPG file



This site focuses or refers to information and services regarding manufacturing activities Local Authorization Attachment Premises Information hydrocarbon-based solvents manned motor vehicle Track and Trace conditional license chain of custody medicinal and adult use cannabis goods transported together the commercial medicinal and adult-use (recreational) small product packaging secondary package amount of THC/CBD per serving and per package M-licensees three cannabis licensing authorities dried flower MCSB shipping manifest procedures for inventory control A-license commercial cannabis manufacturing in California Industrial Hemp Advisory Board Financial information California Department of Public Health (CDPH) local jurisdiction authorization emergency regulations 100 mg of THC per package MCSB’s temporary license application Category II Residual Pesticides Testing The Manufactured Cannabis Safety Branch (MCSB) Poison Prevention Packaging Act of 1970 (PPPA) commercial kitchens minimum standards for extraction processes period of 120 days shaped like a human, animal, insect, or fruit cannabis adult-use products 120 days 2019 new laws amount of sodium commercial cannabis products Foreign Material Testing designated structure CDPH-issued universal symbol Form # CDPH-9041 transportation CalCannabis Cultivation Licensing Ethanol Standard Operating Procedures (SOPs) manufacturing practices member manager waste management laws adult-use commercial cannabis activity cannabis event organizer license certified by a California-licensed engineer ISO/IEC 17025 accreditation destruction of cannabis goods public health and safety transport cannabis goods to retailer Proposed Section 40133 evidence of rehabilitation hang tag or a peel-back label three state cannabis-licensing authorities annual license application loan provided to a commercial cannabis business Food-grade Butter/Oil sanitary workplaces sales of cannabis goods conducting quality assurance review testing laboratories Fingerprints cannabis waste persons 21 years of age or older requiring refrigeration scaled to the gross annual revenue of the licensed premises persons with a financial interest in the cannabis business tobacco products licensing cannabis microbusinesses carbohydrates and fat per serving at least 20% ownership interest Microbusiness Carbon Dioxide (CO2) track and trace system Temporary event up to 4 days Cannabinoids Testing Arranging for laboratory testing 2019 recent news Butane/Hexane/Propane Criminal History distributors edibles packaging opaque recordkeeping commercial cannabis manufacturing activity CDTFA seller’s permit commercial cannabis manufacturing Licensee Lookup Tool cannabis plants secondary packaging infusion must enter certain events BUREAU OF CANNABIS CONTROL some nutritional facts The California Department of Public Health's Incorporating THC/CBD concentrates CDPH-9041 amount of THC content exception for testing laboratories evidence of the legal right to occupy the premises Local Issuing Authority product formulation entry into the legal, regulated market health impacts of cannabis payable to the state of California Individual Owner microbusinesses periods of 90 days extensions waste disposal disposal an officer or director of a cannabis business 2019 issues Terpenoids Testing medicinal and adult-use cannabis manufacturing Manufactured Cannabis Safety Branch licensed physical location (premises) manufacturing (Level 1 manufacturing, Type 6) Manufactured Cannabis Licensing System (MCLS) Manufacturing (non-volatile) pre-made or purchased no infusion of nicotine immature live plants and seeds being transported from a licensed nursery Category II Residual Solvents and Processing Chemicals Testing inventory inventory and quality control loop system extraction Retailer (nonstorefront) Personnel Requirements transporting cannabis goods secured area cannabis industries operating premises extracts cannabis market alcoholic beverages online licensing system Homogeneity Testing of Edible Cannabis Products basic nutritional information temporary license Proposition 64: The Adult Use of Cannabis Act of 2016 licensing cannabis third-party testing laboratories manufacture cannabis products sanitary and hazard-free environment local jurisdiction state cannabis licensing public Licensee Lookup Tool regulatory framework Department of Food and Agriculture’s CalCannabis Cultivation Licensing division Cannabis Manufacturing aggregate interest of 20% or more opaque exit package Office of Environmental Health Hazard Assessment (OEHHA) cultivation licensing cannabis retailers Microbial Impurities Testing (A. fumigatus, A. flavus, A. niger, A. terreus) California Department of Public Health manufacturer's name contaminants commercial cannabis activity topicals nonlaboratory quality control cannabis training medicinal and adult-use commercial cannabis activity retailers meat and seafood, and other products vape cartridges A-license and an M-license Conducting quality assurance review of cannabis goods Proposition 65 Manufactured Cannabis Safety Branch (MCSB) quality control Premises Diagram at least 99% purity purchasing cannabis products on tribal lands The Bureau of Cannabis Control (BCC) child-resistant outer package Owner concentrate Local Authorization disposal and destruction methods M-license packaging and labeling supply chain Identifying information Heavy Metals Testing licensed cannabis distributors Premises diagram limited to a maximum of 1,000 mg per package access to the area(s) 2019 compliance regulations for medicinal and adult-use cannabis licensing and regulating commercial cannabis manufacturers licensing cannabis distributors LICENSE APPLICATION REQUIREMENTS managing member laboratory quality assurance Category I Residual Pesticides Testing equity interest in a commercial cannabis business potentially-hazardous foods Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) medicinal commercial cannabis activity testing of cannabis goods unique ID/batch number California Public Records Act Temporary License Application Information Business Information capsules tinctures surety bond activity for a period of 120 days Vehicle Requirements highly-concentrated THC/CBD such as oil, wax and resin license review process local jurisdiction’s requirements transportation of cannabis goods final form storage of cannabis goods Transition Period shared-use manufacturing facilities Completed Temporary License Application Form commercial cannabis manufacturers Business and Professions Code section 26050.1 no infusion of alcohol diagram of the business’s layout A-licensees Non-Storefront Retailer (Type 9) Percentage of ownership ANTICIPATED ANNUAL (NONTEMPORARY) LICENSE APPLICATION REQUIREMENTS definition of owner 2019 regulations Local Jurisdictions CALIFORNIA BUREAU OF CANNABIS CONTROL cannabis cultivation licensing 2019 updates 600 foot radius of a school stickers testing methods MANUFACTURED CANNABIS SAFETY BRANCH labeling Application Checklist manufacturing cannabis products licensed premises protocol A-license and an M-license for the same commercial cannabis activity 2019 revisions licenses for both medicinal and adult-use cannabis manufacturing at the same premises Temporary License Application Category I Residual Solvents and Processing Chemicals Testing compliance with regulations informational panel Operating Procedures allergen information Licensee Information Department of Public Health’s Manufactured Cannabis Safety Branch security labels not be attractive written procedures for inventory control financial interest holder licensed cannabis cultivators re-sealable inhalable cannabis transportation and security 600-foot radius of a school Edibles– Products Bond in the amount of $5,000 contaminant free cultivation (on an area less than 10,000 square feet) identity of the product 2,000 mg of THC per package for the medicinal-use market onsite sale and consumption of cannabis goods regulations for medical and adult-use cannabis in California Distributor transport exit packaging Extractions using CO2 security and cannabis waste disposal testing lab CO2 and ethanol extractions operating procedures Retailer (Type 10) Microbial Impurities Testing (Escherichia coli and Salmonella spp.) 2019 fines Labor peace agreement medicinal and adult-use or both markets Medical Cannabis Regulation and Safety Act of 2015 health claims convicted of a substantially related crime Licensees Cultivation less than 10,000 supplemental label disclosure of all criminal convictions motor carrier permit structure and formation documents Medicinal and Adult-Use Cannabis Regulation and Safety Act property for the commercial cannabis activity remove THC/CBD product as a candy prohibited 2019 important information manufacturers who package for other producers no added caffeine paper inserted into the packaging Mechanical ingredient list separate applications Live Scans for each owner packaging packaging and labeling requirements for pre-rolls edible products manufacturing Temporary Cannabis Event cannabis sales and/or consumption local jurisdiction’s ordinances and regulations Moisture Content Testing THC levels volatile solvent mandated warning statements Water Activity Testing of Solid or Semi-Solid Edibles Physical address product guidelines Seller’s permit number investment into a commercial cannabis business highly-concentrated oils or waxes medicinal and adult-use markets finished product packaging and labeling requirements workshops hosted by the Bureau of Cannabis Control Transport vehicles alarm system Type S share facility space tamper-evident valid waiver onsite consumption of cannabis goods primary panel requirements 2019 problems comply with all packaging and labeling requirements limited to a maximum of 10 mg of THC per serving Distributor Transport Only child-resistant packaging Business Organizational required limits cannabis cartoons cannabis products in container or wrapper for sale Financial Interest compliance with local jurisdiction delivery vehicle $3,000 of cannabis goods government warning statement label Bond and Insurance Information sugar premises diagram supply chains for medicinal and adult-use cannabis products good manufacturing practices licensed cannabis manufacturers licensing scheme Water/Food-grade Dry Ice list of artificial food colorings ownership premises is not within a Government 2019 proposed changes consumption of alcohol or tobacco shares of stock that are less than 5% of the total shares in a publicly traded company 2019 resolutions Mycotoxins Testing sampling standards Department of Consumer Affairs’ Bureau of Cannabis Control 2019 laws and more.

In addition, Type 5B (Cultivation; Mixed-light; Large) UID Mixed-light Tier 1 Informational panel Adult-use Market Limited-access area Holding Type S (coming soon, shared-use manufacturing facilities) Small Indoor DPH-17-010E Bureau Primary panel Quarantine Batch Specialty Indoor Type N – for infusions infused pre-rolls Commercial-grade, non-residential door lock Harvest Batch Environmental pathogen Topical cannabis product Adequate Dried flower Component Applicant Department Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane) Commercial cannabis activity Type 3A (Cultivation; Indoor; Medium) Outdoor cultivation Type 9 (Non-Storefront Retailer) gross annual revenue for first year in operation under MAUCRSA Theoretical yield Type N Infusions (optional packaging and labeling) Preventive controls Type 1 (Cultivation; Specialty outdoor; Small) CBD Pest track and trace system Type 11 (Distributor) Type 3 (Cultivation; Outdoor; Medium) package flower or pre-rolls Type 2 (Cultivation; Outdoor; Small) Type 1C (Cultivation; Specialty cottage; Small) Mixed-light Tier 2 Canopy Immature plant Flowering Type 2A (Cultivation; Indoor; Small) Hazard Type P Packaging & Labeling Only Type 4 (Cultivation; Nursery) Process Small Mixed-Light Tier 1 Medium Indoor Mature plant Manufacture Cannabis product Ingredient Raw material Premises adulteration Type 1B (Cultivation; Specialty mixed-light; Small) Specialty Outdoor Type 2B (Cultivation; Mixed-light; Small) Track-and-trace systems Serving Watts per square foot Specialty Mixed-Light Tier 2 THC Type 8 (Testing Laboratory) THC limit of 10 milligrams per serving and 100 milligrams per package Cultivation site Type 5 (Cultivation; Outdoor; Large) Specialty Mixed-Light Tier 1 Type 14 (Cannabis Event Organizer) Universal symbol In-process material Qualified individual Type 6 (Manufacturer 1) Extraction: Non-volatile Solvents, Mechanical Methods Nonmanufactured cannabis product Cultivation Verification Type P – for packaging and labeling only Volatile solvent cannabis concentrates Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter) Medium Mixed-Light Tier 1 Lot Type 7 (Manufacturer 2) Extraction: Volatile Solvents Adulterated list of cannabis manufacturers Contact surface M-license Nonvolatile solvent Track and trace system Allergen cross-contact Medium Outdoor MCSB 90-day extension periods Manufacturer licensee products similar to traditional food products prohibited Infusion Mixed-light cultivation Nursery alternate use of a manufacturing premises Labeling Indoor cultivation CBD from industrial hemp Type 13 (Distributor Transport Only) Net weight Licensee Unique identifier Extraction Processor Request for Live Scan Type 10 (Retailer) Quality control personnel Package Wet weight Edible cannabis product Quality Small Mixed-Light Tier 2 Distribution Type 3B (Cultivation; Mixed-light; Medium) Personnel Specialty Cottage Indoor Monitor Specialty Cottage Mixed-Light Tier 2 Type 12 (Microbusiness) Pathogen Finished product Medium Mixed-Light Tier 2 Specialty Cottage Mixed-Light Tier 1 Proposition 65 warning statement Validation Quality control operation Pre-roll Product Identity Type 1A (Cultivation; Specialty indoor; Small) Processing aid Small Outdoor Processing Sanitize cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints Kief Microorganisms Specialty Cottage Outdoor Allergen Type 5A (Cultivation; Indoor; Large) Actual yield infused butters and oils as concentrates and more.


Disclaimer: Informational and educational purposes. Self-help services (not legal advice). Site is not affiliated with any state agency. Note that site might not contain the most updated information. Your receipt of any information from this site does not create a relationship. Prior results do not guarantee or suggest a similar result in other matters. No promise is made with regard to services or content's reliability, availabilty, or ability to meet any needs. Information and services provided "AS IS."

All Rights Reserved